How to install led downlight
How to install led downlight: Zhongshan Wharlgiz Lighting Co.,Ltd supplies LED Ceiling Downlight,LED GFS Bulbs,LED HLW bulbs,ect.
First, how to install led downlights
1. Drilling
Most of the Led downlights are flush mounted, so drilling is the first step. We need to make accurate measurements relative to the downlights embedded in the ceiling to determine the size of the aperture and the location of the installation. Once these two requirements have been confirmed, you can open up.
2, wiring
There are generally two wires in the downlight, which are the live and neutral wires. In the process of excavation, the fire line of the led downlight should be docked with the live line in the original ceiling hole; the neutral line and the zero line are docked. Before the entire connection begins, it is important to make sure that the main switch in the house is closed to avoid an electric shock.
3, wrapped tape
Wrapping tape is a very important part, it is to prevent leakage. After the two wires are connected, they are wrapped with an insulating tape to prevent leakage. After the tape is finished, turn on the power, check the power, check if it is good, and so on.
4, fixed adjustment
After the downlight is fixed, the specific angle and height can be adjusted. Just by using the fixed spring, you can adjust a position you like. After reinforcement, you only need to open the light card to directly load the lamp into the lamp holder.
Second, the LED downlight is broken how to change
1. If the power of the LED downlight is damaged, you only need to purchase the power supply with the same voltage and current parameters. The replacement is also very simple.
2. If the led downlight patch is damaged, and the patches are concentrated in the same area, we can remove the damaged section and then re-weld.
3. If you have learned a few electricity, you have the foundation of an electrician. Buy the soldering iron to self-weld the chip components on the led lamp, which will test everyone's welding technology.
4. If the lamp bead of the LED downlight is damaged, it will be relatively troublesome to repair. It is the same as the drive power of the LED downlight. For safety reasons, it is recommended that you go to a professional to repair. Don't be confident in replacing it, it will cause the LED tube to explode.
评论
发表评论