Shower bracket installation method

The shower is a more important part of the bathroom combination. Only the shower is good enough, the water is big enough, and we are comfortable enough when we take a shower. The author tried to leak water from the shower, which is really inconvenient. In order to be able to use the shower well, the installation of the shower mount is also very important. The following small series introduces you to the installation method of the shower mount. 

brass bracket wall mount bracket brass holder shattaf holder

Portable shattaf bracket: Portable shower is the most commonly used shower. The portable shower bracket has only the function of fixed shower, commonly known as the base.

Overhead shattaf bracket: The overhead shower is commonly known as the large shower. The bracket is installed in the wall. It does not have the lifting function. It can adjust the angle of the shower water, and the upper and lower movement angles are more flexible.

Lifting shattaf bracket: This type of shower bracket is usually also used for large showers. It has the function of lifting shower height and can adjust the height of the shower according to the height of the user. 

brass bracket wall mount bracket brass holder

1. Install two shower pedestals. Shower hangs suggest a height of 1.2 meters from the ground and another 1.8 meters. First put the decorative cup into the thread of the shower bracket. After wrapping the raw material tape, screw the left and right shower brackets into the joints of the hot and cold water pipes.

2. Adjust the distance between the front and rear of the left and right shower brackets to be 9 cm, and the height is consistent, which is consistent with the distance from the wall. Place the water stop gasket into the water inlet hole at the rear of the faucet body, and then attach the shower faucet to the shower bracket. Install the water nozzle. The installation interface of the shower rod holder is the 1/2-inch universal diameter of the hot and cold water pipe, preferably the R1/2 taper threaded joint, the left is hot water, the right is cold water; the distance between the center of the joint is about 15 cm, the height of the joint from the ground is recommended to be 60 cm. 

brass bracket wall mount bracket brass holder

3. Install the shower tube and shower head. Look at some small commodity wholesale markets, there are merchants specializing in the sale of concept household goods, there is a product that can be put on tiles to put showers. After the faucet is installed, it must be horizontal without tilting. It is about 900-1100mm away from the ground. When installing the faucet with a wrench, be careful not to damage the plating surface.

We have a wealth of business experience. We provide satisfactory products and services to our customers around the world. Our products include shattaf bidet faucet,press button faucet Please contact us。http://www.haoluu.com/